Product description
Protect P1 Grey Roof Coating Double Pack — 10kg Total
This double pack contains 2 × 5kg tins of Protect P1 Grey Roof Coating. The solvent-based acrylic coating has a high-build, fibre reinforced finish designed for general roof maintenance and repairs. Its fibres help bridge small gaps and cracks, and the coating is water resistant immediately after application.
Protect P1 can be used on the surfaces listed on its label, including flat and pitched roofs, weathered asphalt, bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt, and galvanised or ferrous metal. Confirm suitability for the particular surface and job before applying.
Product details
- Pack contents: Two 5kg tins
- Total coating: 10kg
- Colour: Grey
- Base: Solvent-based acrylic
- Finish: High-build, fibre reinforced
- Application: One coat by brush, roller or squeegee
- Application rate: Approximately 1–2kg per m²
- Estimated double-pack coverage: 5–10m²
- Touch dry: 3–4 hours
- Full cure: 6–7 days
- Application temperature: 5°C to 25°C
Before you apply
Remove loose debris, moss, lichen, dirt and grease, and ensure the surface is dry with no standing water. Stir the coating thoroughly before and during use. Apply generously and evenly to form a continuous coating. The label advises that most roofing substrates do not require a primer.
Protect P1 is flammable. Use with good ventilation, keep it away from ignition sources and wear suitable protective gloves, eyewear and clothing. Do not use near fishponds or empty into drains. Follow the full safety instructions on the tin.