Product description
Everbuild Lumberjack Wood Preserver Clear 1L
Everbuild Lumberjack Wood Preserver is a low-odour, deep-penetrating timber treatment designed to provide long-lasting protection against wet rot, dry rot, decay and fungi.
Using Micro-fine active technology, the treatment penetrates deep into timber for effective protection. The clear version is suitable for rough-sawn and planed timber and can be used as a pre-treatment before painting, staining or varnishing.
It can also be applied to damp timber without loss of performance.
Key Features & Benefits
- Protects against wet rot, dry rot, decay and fungi
- Micro-fine actives penetrate deep into the wood
- Suitable for interior and exterior timber
- Suitable for rough-sawn and planed timber
- Can be applied to damp timber
- Quick drying
- Low odour
- Non-flammable
- Ready to use – no dilution required
- Dries clear for a natural appearance
- Can be overpainted, stained or varnished
- Convenient 1 litre size
Where Can Everbuild Lumberjack Wood Preserver Be Used?
Suitable applications include:
- Floorboards
- Joists
- Roof timbers
- Window frames
- Doors
- Interior and exterior joinery
- Rough-sawn timber
- Planed timber
For interior applications, the clear treatment can be left as the final finish where a natural wood appearance is required.
How to Apply
Shake well before use. Apply by brush, spray or dipping without dilution.
When brushing or spraying, apply a minimum of two coats. Apply the second coat approximately one hour after the first at 20°C.
Pay particular attention to the end grain. Where possible, dip the end grain for a minimum of three minutes for maximum protection.
The product appears milky when first applied but dries clear.
Allow the treatment to dry before applying paint, stain or varnish. Everbuild advises allowing up to 48 hours drying time at 20°C before overcoating.
Always read the product label and manufacturer's instructions before use.