{"product_id":"protect-p1-grey-5kg-one-coat-fibre-reinforced-roof-coating","title":"Protect P1 Grey 5kg – One-Coat Fibre Reinforced Roof Coating","description":"\u003ch3\u003eProtect P1 Grey Fibre Reinforced Roof Coating — 5kg\u003c\/h3\u003e \u003cp\u003eFor roof maintenance and repair work, Protect P1 provides a high-build waterproof coating in a grey finish. This solvent-based acrylic formula is reinforced with fibres that help bridge small gaps and cracks. It becomes water resistant immediately after application and forms a protective barrier across the coated surface.\u003c\/p\u003e \u003cp\u003eProtect P1 can be applied to the surfaces named on its label: flat roofs, pitched roofs, weathered asphalt, bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt, and galvanised or ferrous metal. The suitability of any coating depends on the particular roof and its condition, so assess the surface before starting work.\u003c\/p\u003e \u003ch3\u003eAt a glance\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5kg\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Solvent-based acrylic\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-build and fibre reinforced\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication tools:\u003c\/strong\u003e Brush, roller or squeegee\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication rate:\u003c\/strong\u003e Approximately 1–2kg per m²\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e 3–4 hours\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e 6–7 days\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e 5°C to 25°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHow much will you need?\u003c\/h3\u003e \u003cp\u003eAt the recommended application rate, one 5kg tin covers approximately \u003cstrong\u003e2.5–5m²\u003c\/strong\u003e. Coverage varies with the surface’s condition and porosity; allow for greater use on rough or porous areas.\u003c\/p\u003e \u003ch3\u003ePreparing and coating the surface\u003c\/h3\u003e \u003cp\u003eStart with a clean, dry surface. Remove loose material, moss, lichen, dirt and grease, and make sure no standing water remains. Stir Protect P1 thoroughly before use and continue stirring during application to maintain an even consistency. Apply generously with a brush, roller or squeegee, working evenly to achieve a continuous coating. According to the label, most roofing substrates do not need a primer.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBefore use:\u003c\/strong\u003e Protect P1 is flammable. Keep it away from ignition sources, provide good ventilation and wear suitable protective gloves, eyewear and clothing. Do not use it near fishponds or allow it to enter drains. Refer to the full label for safety instructions.\u003c\/p\u003e","brand":"eRoofing","offers":[{"title":"Default Title","offer_id":57607349895541,"sku":"ProtectP1Grey5","price":46.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/5054\/1620\/files\/302f4c46-a251-4fbb-af2f-647eaed0d7b6.jpg?v=1790325998","url":"https:\/\/siliconedirect.co.uk\/products\/protect-p1-grey-5kg-one-coat-fibre-reinforced-roof-coating","provider":"Silicone Direct","version":"1.0","type":"link"}